Our Insight

Welcome to the Cliste Insight Portal

A knowledge platform designed to share ideas, best practices, and real-world experiences in reliability engineering.

RAMFMEA

Subsea Reliability Strategy for Indonesia's Ultra-Deepwater Gas Hubs

27 August 2026 | 7min read

Indonesia's oil and gas sector just crossed a threshold it has never operated at before. With Eni's North Hub project in the Kutei Basin now under construction, using the Bahtera Haluan Lestari FPSO rated for water depths up to 2,000 meters, the country's subsea reliability playbook built on shallower shelf experience no longer applies wholesale. Every intervention on a subsea tree, manifold, or f...

Another articles

AI Isn't Just for Chatbots: A Case Study in Automated Screening Systems

SKK Migas's 2026 Target Has a 30,000 bpd Hole, and It's Not a Drilling Problem

How Much Wall Loss Is Too Much? API 579 Explained

Deciding When Machinery Health Monitoring Actually Pays Off

AI Isn't Just for Chatbots: A Case Study in Automated Screening Systems

Ask most people "does your company use AI?" and their mind jumps straight to chatbots. But one of the biggest business benefits of AI actually has nothing to do with that, it comes from speeding up op...

20 August 2026 | 5 min read202

DEP

BAA

RCA

SKK Migas's 2026 Target Has a 30,000 bpd Hole, and It's Not a Drilling Problem

SKK Migas is projecting year-end 2026 oil lifting of 600,000 to 610,000 barrels per day, but as of May 31 the country was producing 576,200 bpd, a gap of roughly 24,000 to 34,000 barrels. The regulato...

18 August 2026 | 7 min read441

RBI

How Much Wall Loss Is Too Much? API 579 Explained

A significant share of piping systems in Indonesia's refineries, petrochemical plants, and steam networks are operating past their original design life, carrying wall thinning, pitting, or crack indic...

10 August 2026 | 6 min read254

VIB

RCM

ECA

Deciding When Machinery Health Monitoring Actually Pays Off

A rotating asset rarely fails without warning. Bearings degrade, shafts misalign, and rotors lose balance over weeks or months, and each of these mechanical faults writes its signature into the machin...

17 July 2026 | 7 min read211